一、       使用用途Application：

該產品主要用于精確打磨軌頭，以及去除鋼軌焊縫處的焊瘤，修整鋼軌廓形達到標準要求。機體采用高強度鋁合金架，裝有偏向防滑導輪，可打磨軌頭的兩側面、頂面及鋼軌磨損所產生的毛刺，可90度不同角度調整打磨填補目前鋼軌仿形打磨機領域空白。

For true-to-form and straight re-profiling of the rail head at weld joints as well as of built-up welded running surfaces. Body with high strength aluminum alloy frame, with bias anti-skid wheel, grinding rail two side and the top surface .It is special equipment for railway maintenance of rail grinding, adjusted at different angles of 90 degrees can fill the current grinding machine field blank.

二、產品特點Main Feature：

1、操作輕便適合各種鐵路鋼軌頭外輪廓上平面，側面及過渡圓弧的打磨作業。
2、針對鋼軌打磨作業特殊性，發動機專利設計獨立潤滑系統，可持久傾斜90度或多角度對鋼軌軌側面和廓形進行精確打磨。

3、配備兩個支撐滾輪和兩個導輪，一個人就可以輕松使打磨機能夠在鋼軌上移動和作業，輕便、快捷。

4、可選擇打磨機兩端接上加長裝置后，用來打磨軌面的波浪磨耗。

Has the function of profile grinding, make the rail welding seam smooth surface after grinding .The two ends of the grinding machine are connected with the lengthening device, which can be used to polish the wave abrasion of the rail surface. According to the particularity of the grinding operation, the research and development of patent lubrication system convenient rollover 90 degrees, in order to adapt to the side of the grinding head

三、       工作原理Operational Principle:

發動機帶動小帶輪轉動，通過皮帶傳動帶動磨頭旋轉，對鋼軌產生打磨作用；通過旋轉手輪控制升降桿的升降調整打磨位置；通過手把與底梁之間的彈性頂力定位打磨機位置，在傾斜扶手的同時實現打磨。

Engine drives the pulley to rotate, and the grinding head is driven to rotate by the driving belt to grinding the rail; By rotating the hand wheel control lifting rod of the lifting adjusting location polished; Through elastic beam between the hands and mudsill positioning grinding location, even in inclined handrails, grinding is realized.